ZX-530 is a thermoplastic synthetic composite material with a number of positive characteristics. Nowadays it has been widely applied. The table below describes its main advantages and features.

Application parameters* ZX-530CD3 ZX-530KF15 ZX-530EL3
Specific features: Composition: fibre and PTFE. Minimal wear up to +100°C a small wear up to +200°C.  Stiff and dimensinally stable. Composition: carbon fibre. Low thermal strain. High wear resistance and stiffness, low friction. Polymer reinforced. High elongation and large notch impact strength.
Temperature (T) Celsius -100° to +240° (+260°) -50° to +240° (+260°) -100° to +220° (+240°)
Surface pressure (p), max  20 (56) MPa  50 (120) MPa  25 (71) MPa
Sliding speed (v), max  100 m/min  100 m/min  50 m/min
Fatigue (S), max  19 MPa  41 MPa  6 MPa

* Values in the brackets are valid for short-term service

Compared to PEEK, ZX-530CD3 и ZX-530KF15 polymers demonstrate a higher pv-value and good dimensional stability when heated.

Detailed comparison charts on the properties of ZEDEX polymers you can find in our cataloque «Materials»

If you have any questions or need an advice on any service or product (for example, ZX-530), call us at the numbers indicated below, or use the online form at the top of the page. Our experts will answer all the issues that interest you shortly or hold a special consultation if it is necessary.

Похожие статьи: